|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
 ;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
;
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
No 3.3V
No 5.0VA
Is the Vcc(3.3V) supplied to Q162 Emittor?
YES
NO
Check or Replace the D124
Is the Vcc(5.3V) supplied to IC153 Pin1?
YES
NO
Check or Replace the D123
Is the Q162 Base �H�?
YES
NO
Check the PWR CTL �H� signal from µ-com
Check or Replace the IC153
Check or Replace the Q162
No 5.0V
No 5.0VA
Is the Vcc(5.3V) supplied to IC156 Pin1?
YES
NO
Check or Replace the D123
Is the Vcc(5.3V) supplied to IC155 Pin1?
YES
NO
Check or Replace the D123
Is the IC156 Pin4 �H�?
YES
NO
Check the PWR CTL �H� signal from µ-com
Is the IC155 Pin4 �H�?
YES
NO
Check the PWR CTL �H� signal from µ-com
Check or Replace the IC156
Check or Replace the IC155
3-3
|
|
|
> |
|
